Home > Accessories, Batteries, Cables, Etc. > Riser Cards > 2U Riser Cards > 2U PCI Ribbon Riser Card
2U 32bit pci riser card
Click here to go back
50810007 - 2U PCI Ribbon Riser Card
Condition: New. Warranty: 90 days. $87.00
2U Triple 32bit
PCI Riser Card
2U 32bit PCI Riser Card (3 32-bit PCI slots)
PCITX3N1 is a PCI 3 in
1 right angle riser. The overall dimension of the main board assembly is 2.75"H
x 7.10"W. The middle slot is connected directly to the gold fingers.
Majority of the bus signals of the top slot is connected to the middle slot.
However, there are some dedicated signals that are needed for the top slot, and
they are borrowed from a narrow cable that is plugged into a nearby motherboard
slot. The bottom slot is a completely independent connection, coming from a
wide cable that connects to yet another PCI slot on the motherboard. This
arrangement allows the bottom slot to work off a PCI slot on the Motherboard
that is not common to the PCI slot where the riser is plugged in. The user can
order the riser with a three PCI-32 bit slots or up to a three 64 bit slots
configuration. The VIO voltage of each slot on the riser are selectable. All
connectors are mounted on the B side of the riser card. The top PCI slot is
located at 2.515", the center PCI slot is located at 1.715",
and the bottom PCI slot is located at 0.915" from the bottom of the
board. The wide cable and the narrow cable can be ordered in various lengths. A
power option (-W) is available to provide more 12V, 5V and 3.3V to the
connectors on the riser. It accepts the power from a 4 pin PC power connector
for the floppy drive.
MB PCI/AGP Slot positions:
Position A: normally it's AGP,
6.4" away from the Keyboard connector edge.
Position B: normally it's 1st PCI,
7.2" away from the Keyboard connector edge.
Position C: normally it's 2nd PCI
Position D: normally it's 3rd PCI