Go Back

Updating Product Details

Please wait while we refresh the product information...

Intel MS440GX

Intel MS440GX

Part #: 106229
Condition: Refurbished
Warranty: 30 days
Brand: Intel
| Log in to add review
Rate this product:

Updating Variation

Please wait while we update product details...

Intel MS440GX Motherboard

intel ms440gx dual slot 2 motherboard MODEL
Intel MS440GX
PROCESSOR/CACHE
Support for single or dual Pentium ® III Xeon and Pentium ® II Xeon processors with 512 KB or 1 MB of integrated L2 cache.
CHIPSET
Intel ® 82440GX AGPset including the Intel ® 82443GX PCI/A.G.P. controller (PAC) and the Intel ® 82371EB PCI/ISA IDE Xcelerator (PIIX4E).
SYSTEM MEMORY
Four 168-pin sockets for gold-lead DIMM™s.
Up to 2 GB of ECC SDRAM (32 MB minimum)
16 MB, 32 MB, 64 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB
Supports unbuffered or registered (not mixed) 100 MHz (PC100 compliant) ECC SDRAM.
Memory Voltage:   3.3V only
INTEGRATED PCI/ISA IDE XCELERATOR
Two independent channels for four IDE devices
PIO Mode 0, PIO Mode 3, PIO Mode 4, Ultra DMA and CD-ROM support
Two stacked USB connectors
INTEGRATED SUPER I/O
National Semiconductor 97307 I/O controller
Two FIFO serial ports, RS-232C, PC16450/16550A compatible
Parallel Ports:   Compatible, Bidirectional, ECP, and EPP modes
Floppy Controller:   1.44 MB, 2.88 MB, 3-Mode support
Keyboard/Mouse:   8042A Compatible Controller
Real Time Clock:   Century Reg. +/- 13 min/yr accuracy
IR Interface:   Serial Port 2 can be configured to support an IrDA module connected to the front panel infrared connector.
SYSTEM BIOS
Intel ® E28F004BXT80 4-Mbit flash component with Intel/Phoenix BIOS
Plug and Play, IDE drive auto configure, Advanced Power Management (APM)1.2, ACPI 1.0, DMI 2.0, ECC/Parity support, LS120 support
EXPANSION SLOTS
One dedicated AGP slot
Five dedicated PCI slots
One shared PCI/ISA slot
OTHER FEATURES
EtherExpress PRO/100 PCI LAN Subsystem
WfM compliant, Wake-On-LAN support
Integrated Audio
System Management Bus Interface (SMBus)
PC Health Monitoring
DIMENSIONS
Custom ATX form factor. Standard ATX slot and external connector placement. Overall board dimensions are 12"x13" with a 2.25" x 3.1" notch with four non-ATX mounting holes.

No information available

No reviews yet. Be the first to share your experience!

Copyright © 2026 Interloper Inc. All Rights Reserved.