Interloper Specialty Upgrade Kit # 4 socket 7 motherboard with 3 isa slots, cpu and memory

What you get:

• MSI MS-5169 motherboard. Socket 7 ATX motherboard with 3ISA, 4PCI and 1 AGP slot. ATX form factor. 
   
• ATX Cable set
   
• Intel Pentium 200 CPU
   
• Heatsink and fan
   
• 64MB SDRAM

The CPU, fan and memory are installed on the motherboard so you don't have to. The kit is tested before shipment.

• CACHE: 
  • 512KB Pipelined Burst SRAM on board
• BIOS: 
  • The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.
  • The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications. 
     
• Internal I/O Interface: 
  • An IDE controller on the AladdinRM1543c PCI Chipset provides IDE HDD/CD-ROM with PIO Bus Master and Ultra DMA/33 operation modes.
  • Connect up to four IDE devices.
• Form Factor: 
  • ATX Form Factor. 11.81" (W) x7.32"(L)
    {30cm x 18.6cm}

Motherboard Specifications 

• Model: 
  • MICROSTAR MS-5169
• Processor Support: 
  • Support Socket 7 for Intel ® Pentium ®, 
  • Cyrix ® 6x86 / 6x86L / 6x86MX, AMD ® K6/K6-2/K6-III processors 
• Chipset: 
  • ALi Aladdin V (M1541 & M1543C) AGPse 
• FSB: 
  • Supports 66 ~ 100MHz 
    
     
• Memory:
  • Supports six memory banks using three 168-pin unbuffered DIMM.
  • Supports a maximum memory size of 768MB
  • Supports ECC(Error Check Correct) and EC(Multiple-Bit Error Correction) function.(100 MHz without ECC)
  • Supports 3.3v EDO and SDRAM DIMM.
• Expansion Slots: 
  • One AGP(Accelerated Graphics Port) slot.
  • 4 x 32-bit bus mastering PCI slots
  • 3 x 16-bit ISA slots
     
• Rear Panel I/O Ports: 
  • 1 floppy port supports 2 FDD with 360K, 720K, 1.2M,1.44M and 2.88Mbytes. 
  • 2 serial ports (COMA + COMB) 
  • 1 parallel port supports SPP/EPP/ECP mode 
  • 2 USB ports 
  • 1 IrDA connector for SIR