Supermicro X7SLM Motherboard

• Storage:
  • Intel ICH7 SATA2 (3 Gbps) controller built-in

• Rear Panel I/O Ports:
  • Super I/O: Winbond 83627DHG chip
  • Clock Generator: CK505
  • Four Serial ATA ports ( 3Gbps )
  • Four SATA hard drives supported
  • One EIDE channel supports up to two UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
  • 1 Floppy controller; 1.44 MB
  • 2x RJ45 LAN port
  • 5x USB 2.0 / 1.1 compatible
  • 2 rear + 1 TypeA connector + 1 header (2 ports)
  • Intel GMA950 on chip
  • PS/2 keyboard and mouse ports
  • 1x Fast UART 16550 serial port
  • 1x Serial Header

• Hardware Monitoring:
  
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V/+5V Standby, VBAT, Memory, Chipset
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
  • FAN: Total of five 4-pin fan headers
  • 5 x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on / off control
  • Support 3-pin fans (without speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan conn.
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 5 x Fan Connectors
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) Support
  • PECI
  • CPU / System Overheat LED
  • Suspend-state indicator LED
  • +5V standby alert LED
  • Chassis intrusion Detection
  • Chassis intrusion Header
  • SDDC Support
  • RoHS
  • Environmental Spec.: Operating Temperature: 10 to 35 C (50 to 95 F)
  • Non-operating Temperature: -40 to 70 C (-40 to 158 F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
    

Motherboard Specifications

• Model:
  • Supermicro X7SLM Motherboard
    

• Processor Support:
  
  • Single LGA775 ZIF Socket
  • Supports an Intel Core2 Duo E4000 Series
  • Supports an Intel Pentium E2000 Series
  • Supports an Intel Pentium D 945, 935, 925, 915 and 820, 805
  • Supports an Intel Pentium 4 600 and500 Series
  • Supports an Intel Celeron E1000 Series
  • Supports an Intel Celeron 400 Series
  • Supports an Intel Celeron D 300 Series

• Chipset:
  
  • Intel 945GC
  • ICH7 + Realtek RTL8111C

• FSB:
  • 1066 / 800 / 533 MHz system bus

• Memory:
  
  • Two 240-pin DIMM sockets
  • Supports up to 2 GB of unbuffered, non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
  • DDR2 667/533/400MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
  • 256 MB, 512 MB, 1 GB
  • 1.8V only

• Expansion Slots:
  • 1 (x8) PCI-Express Slot
  • 1x 32-bit 33MHz PCI (5V) slots

• On-Board Video:
  • Onboard GMA950 video

• On-Board LAN:
  
  • 2x Realtek RTL8111C Gigabit Ethernet
  • Supports 10BASE-T, 100/1000BASE-TX, RJ45 output

• Form Factor/Dimensions:
  • uATX
  • 9.6" x 9.6 ", (24.4cm x 24.4cm)
• Manageability:
  
• SuperDoctor III
• Watch Dog
• NMI
• Power Configurations: ACPI/APM Power Management
• Main Switch Override Mechanism
• Suspend to RAM (STR)
• Power-on mode control for AC power recovery
• Internal / External modem remote ring-on
• BIOS:
  
  • 8Mb Flash EEPROM with AMI BIOS
  • Features: Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0 / 2.0 / 3.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.3

• Special Features:
  • Only Supermicro 1U chassis is recommended for 1U Building Block Solutions