• Storage:
  • (2) ATA-133 Channels: up to 4 ATA-133 devices
  • (4) Dual port SATA controllers (two from CK804pro and two from IO4)
  • (8) SATA2 ports for up to eight drives at 3.0Gb/s
  • RAID 0, 1, 0+1, 5 supported

• Rear Panel I/O Ports:
  • (1) Parallel port header
  • (2) Serial ports (one connector, one header)
  • (6) USB v2.0 EHCI ports (two rear, four headers)
  • (1) Stacked PS/2 mouse and keyboard ports
  • 3 Network Ports

• Internal I/O Interface:
  • (1) Floppy connector support up to two drives
  • (2) Serial ports (one connector, one header)
  • (6) USB v2.0 EHCI ports (two rear, four headers)
  • (2) PCI-E x16 slots (with x16 signal)
  • (2) PCI-E x16 slots (with x4 signal)
  • (1) PCI v2.3 32-bit 33MHz slot
  • (5) Usable expansion slots total

• Hardware Monitoring:
  • Renesas Baseboard Management Controller
    (BMC); tailored for IPMI 2.0 Spec.
  • Flexible Windows & Linux Management Solution
  • Supports RMCP and SNMP protocols
  • Supports ASF standard and EMP
  • Supports KCS and BT styles
  
  
• Accesories:
  • TYAN Server Management Daughter card
    (optional) supports features listed below via
    IPMI header ( SMDC/TSO Support )

Motherboard Specifications

• Model:
  • Tyan Thunder n4250QE Quad Opteron 8000 Motherboard

• Processor Support:
  • Four 1207-pin sockets support AMD Opteron (Rev. F) 8000 series processors Socket 1207

• Chipset:
  • nVidia nForce Professional 2200 (CK804pro) & nForce Professional 2050 (IO4) + Winbond W83627HF

• FSB:
  • 1000 MHz

• Memory:
  • 16x 240pin DDR2-667/533/400 DIMMs, Dual Channel, ECC/REG, Max capacity 64GB
  • Supports reg., ECC, & four rank mem. modules

• Expansion Slots:
  • 4 PCI-e slots (16x)
  • 1 PCI (1x)

• On-Board Video:
  • XGI Volari Z7 (XG20) PCI graphics controller
  • 16MB Frame Buffer of video memory

• On-Board LAN:
  • (2) Marvell 88E1111 GbE PHY
  • Each one has RJ-45 LAN connector w/ LEDs
  • Each one has front panel LED header
  • (1) Intel 82541PI GbE LAN controller
  • RJ-45 LAN connector with LED

• BIOS:
  • Phoenix BIOS on 8Mbit LPC Flash ROM
  • ACPI 2.0; Power management: S0, S1, S4, & S5
  • Serial Console Redirect
  • USB device boot
  • 48-bit LBA support

• Form Factor:
  • SSI MEB footprint (13" x 16")
  • EPS12V/SSI v3.5 (24 + 8 + 8) power connectors