Rackmount Uninterrupted Power Supply

APC Part # SmartUPS A1000RM2U

Technical Notes:
FEATURES- 1000VA Smart-UPS Rack Mount- Beige color 6 Outlets with Runtime up to 29.5 minutes, 2U Rack Height. Lightning and Surge Protection shields hardware from damage; Network- grade Line Conditioning; Full time EMI/RFI filters prevent line noise from causing data errors; SmartBoost automatically corrects brownout conditions allowing you to work through brownouts without unnecessary battery drain. Sine-Wave Output provides an assurance of compatibility with all loads. SmartSlot allows you to install one of a variety of optional accessory cards that are available to customize and enhance the management of your APC Smart-UPS. SmartTrim Automatically corrects overvoltage conditions allowing you to work through overvoltages without unnecessary battery drain.

• User-renewable UPS System - With normal use, a UPS battery will last three to six years. APC™s renewable UPS system eliminates the need for factory service and loss of protection by letting you replace batteries for a fraction of the cost of a new UPS.
• CellGuard intelligent battery management actively increases battery life and system reliability using FastCharge technology, automatic battery and circuitry self-tests, and advanced diagnostics.
• Line-Interactive Design provides greater performance, filtering, reliability and efficiency than double conversion, on-line UPS units.
• Network Interface Port Provides the ability to coordinate a safe shut- down with most popular operating systems.
• Site Wiring Fault Indicator immediately warns you of wiring problems like improper grounds that could cause shocks or prevent the UPS from adequately suppressing surges.
• LED Display and Audible Alarms Actively let you know if the unit is on battery, if the battery is low, or if there is an overload condition.
• Automatic Diagnostic Testing Biweekly testing of all internal compon- ents, including the battery, ensures your UPS is ready when you need it.
• Includes PowerChute ® plus software for Advanced UPS power management and diagnostics. Provides network administrators with useful UPS information and great flexibility in configuring UPS reaction to power events. In addition to extensive unattended system shutdown, you'll get UPS testing/status, remote UPS management and environmental/power monitoring Support for Novell NetWare, Windows, Windows 95, Windows NT (Intel only),Windows for Workgroups and SCO Unix included. PowerChute plus for use with other operating systems sold separately).

VOLT/AMP RATING- 1000
WATT RATING- 670
TYPICAL RUNTIME- 29.5 minutes (typical backup time at half load). (Go to sizing.apcc.com for most recent sizing information.)

VOLTAGE - Input: 120 VAC single phase, 50 or 60Hz +- 5%
Waveform Type: Stepped approximation to a sine wave.
Transfer Time: 2ms typical; 4ms maximum
Input Range : 82 ~ 147 V

UPS RECEPTACLES- 6 Battery/Surge NEMA 5-15R
CONNECTIONS(s) - DB-9 RS-232 port Smart-Slot card port
SURGE RATING - 480 Joules

MANAGEMENT - Interface port: RS-232 Serial communication port;
SmartSlot card expansion slot for future expansion.

Control Panel: LED status display with On Line; On Battery; Replace Battery; and Overload indicators.
Audible Alarm: Alarm when on battery; distinctive low battery alarm, con- figurable delays.

FILTERING - Full time multi-pole noise filtering; 0.3% IEEE surge let- through; zero clamping response time; meets UL 1449.

BATTERIES - Maintenance-free sealed Lead-Acid battery with suspended electrolyte; leakproof. RBC23 replacement battery cart. 3.0 hours typical recharge time.

SOFTWARE - PowerChute Smart-UPS Bundle

APPROVALS - CSA, FCC A, UL 1778

INSURANCE - $25,000 lifetime protection, including lightning.

NOISE - 34 dBA (audible noise at 1 meter from surface of unit).

SIZE - 19.0"w x 3.50"h x 18.0"d WT.- 62.00 lbs.