Asus M3N78 PRO Motherboard
Supports AMD Phenom FX / Phenom / Athlon 64X2 / Athlon 64 FX / Sempron processor in the Socket AM2+, NVIDIA GeForce 8300 chipset, 1 x PCI Express x16, 2 x PCI-E x1, 3 x PCI 32-bit, DDR2, LAN, USB, IDE, SATA2, RAID, Firewire, Video (VGA, DVI & HDMI), Audio, SPDIF, ATX Form Factor |
- Internal I/O Interface:
- 1 x Floppy connector
- 3 x USB 2.0/1.1 headers
- 1 x VGA connector
- 1 x S/PDIF output connector
- 1 x COM connector
- 1 x IEEE1394a connector
- 6 x SATA2 ports
- 1 x IDE Port
- Rear Panel I/O Ports:
- 1 x PS/2 Keyboard
- 1 x S/PDIF Out port
- 1 x IEEE 1394a
- 1 x HDMI
- 1 set 7.1 channel Audio Jack (6 jacks)
- 6 x USB 2.0/1.1 ports
- 1 x RJ 45 Port
- On-Board LAN:
- NVIDIA Gigabit MAC
- Realtek ® 8211CL Gigabit PHY featuring AI NET2
- Power Connector :
- 1 x 24pin main power
- 1 x 8-pin ATX 12V Power connector
- Audio:
- Realtek ® ALC1200 8 -Channel High Definition Audio CODEC
- Coaxial S/PDIF out ports at back I/O
- Support Jack Detection and Multi-streaming
- Firewire:
- LSI ® FW322 controller supports 2 x 1394a ports
|
Asus M3N78 PRO Motherboard
- Model:
- Asus M3N78 PRO Motherboard
- Processor Support:
- Supports AMD Phenom FX / Phenom / Athlon 64x2 / Athlon 64FX / Sempron
- Support up to 140W CPU
- AMD Cool 'n' Quiet Technology
- Socket AM2+
- FSB:
- Up to 5200/MT/s HyperTransport 3.0 interface for AM2+ CPU
- 2000 / 1600 MT/s for AM2 CPU
- Chipset:
- Memory:
- 4 x 240-pin DDR2 DIMM socket support up to 8 GB
- Support Dual Channel DDR2 1066/800/667 Mhz
- ECC and non-ECC, un-buffered
- DDR2 1066 is supported by AM2+ CPU only
- Expansion Slots:
- 1 x PCIe x16
- 2 x PCIe x1
- 3 x PCI 32 Bits 2.2
- Support PCIe 2.0 / 1.0 Architecture
- Video:
- Integrated NVIDIA GeForce ® 8 Series GPU
- Hybrid SLI Support (supports Windows Vista only)
- Supports HDMI Technology with max. resolution up to 1920 x 1200
- Supports DVI with max. resolution up to 1920 — 1200 @ 60 Hz
- Supports D-Sub with max. resolution up to 1920 — 1440 @ 75 Hz
- HDMI/DVI/RGB Support
- Supports Microsoft ® DirectX 10, OpenGL 2.0, Pixel Shader 4.0
- Support PCIe 2.0 / 1.0 Architecture
- Maximum shared memory of 512MB
- Storage:
- NVIDIA ® GeForce 8300
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 6 x SATA 3Gb/s ports (Use SATA1-4 for IDE mode.)
- NVIDIA ® MediaShield RAID Support RAID 0,1,0+1,5,JBOD
- BIOS:
- 8Mb Flash ROM, Award BIOS, PnP, DMI2.0, WfM2.0, ACPI 2.0a, SM BIOS 2.3,
- WOL by PME, WOR by PME, Chasis Intrusion, PXE
- Form Factor:
- ATX Form Factor
- 12 inch x 9.6 inch ( 30.5 cm x24.4 cm )
|