|
- BIOS:
- AMI 2Mb Firmware Hub
- Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
- Support ACPI revision 1.0 specification
- Miscellaneous:
- Provide superior performance between the CPU, DRAM, pipelined,
burst, and concurrent operation.
- Provide a 533MB/sec bandwidth Host/Client V-Link interface with
V-Link-PCI and V-Link-LPC Controllers
- Optional 56K V.90 CNR Modem
- Intel I/O Controller Hub 2 (ICH2) included 256 bytes CMOS SRAM
- With CMOS hardware clear jumper
- Supports Wake on LAN, Wake on Modem, Wake on Alarm, Interrupt
Wake-Up from Keyboard/Mouse, and Keyboard Power ON
|
Motherboard
Specifications
- Processor:
- One Socket 478 supports the Intel Pentium 4 processor with Hyper
Threading Technology up to 533MHz FSB
- FSB (Front Side Bus):
- Chipset:
- VIA P4X400 Northbridge and VT8235 Southbridge Chipset
- Memory:
- Two DDR 184-pin 2.5V DIMM Sockets (DDR266/333)
- Maximum: 2GB
- Expansion Slots:
- 5 PCI slots, 1 AGP slot (8x), 1 CNR slot
- Support five PCI slots of arbitration and decoding for all integrated
functions and LPC bus.
- IDE Controllers:
- Audio:
- Video:
- Rear Panel I/O Ports:
- PS/2 keyboard and mouse connectors
- Four USB2.0 Ports and a LAN connector (optional)
- One EPP/ECP mode parallel port
- One 16550 high-speed serial I/O port
- Audio ports (Mic, Audio-in, Audio-out)
- Internal I/O Interface:
- Support four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA 33/66/100/133)
- Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
- ATX Power Supply Connector
- USB Card Reader Connector (share one USB port from back panel)
- IrDA header
- Internal PC speaker header
- CD ROM/DVD Audio Input header
- 2 Extra USB2.0 Ports
- HDD LED, Reset Switch, Suspend LED, Power Switch headers
- CPU and System Fan headers
- Keyboard Power On header
|
