Supermicro X7SBA Motherboard
- Storage:
- Intel ® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
- Support for Intelligent Platform Management Interface
v.2.0
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC)
- Rear Panel I/O Ports:
- Super I/O: Winbond 83627HF chip
- Clock Generator: CK505
- Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
- 1 Floppy controller; 1.44 MB
- 2 x RJ45 LAN port
- 7x USB 2.0 / 1.1 compatible
- 2 rear + 1 Type A connectors + 2 headers ( 4 ports )
- 1x VGA Port
- PS/2 keyboard and mouse ports
- 1x Fast UART 16550 serial port
- 1x Header
- 1x ECP/EEP Parallel Header
- Hardware Monitoring:
- Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V, 3.3V
Standby, 5V Standby, VBAT
- CPU 4-Phase-switching voltage regulator with auto-sense
from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if
CPU is supported)
- FAN: Total of six 4-pin fan headers
- 6 fans with tachometer monitoring
- Status monitor with firmware speed control
- Low noise fan speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connector
- Temperature: Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
- CPU / System Overheat LED
- Standby Power alert LED
- Chassis Intrusion Detection
- Chassis Intrusion Header
- RoHS
- Environmental Spec.: Operating Temperature: 10 °to 35 °C
(50 °to 95 °F)
- Non-operating Temperature: -40 °to 70 °C (-40 °to 158 °F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95%
(non-condensing)
|
Motherboard Specifications
- Model:
- Supermicro X7SBA Motherboard
- Processor Support:
- Single LGA775 ZIF Socket
- Supports Quad-Core Intel ® Xeon ®
X3300/X3200 series
- Supports Dual-Core Intel ® Xeon ®
E3100/3000 series
- Supports Intel ® Xeon ® processor L3360 and
L3110 series
- Supports Intel ® Core2 Quad
Q9000/Q8000/Q6000 series
- Supports Intel ® Core2 Duo
E8000/E7000/E6000/E4000 series
- Supports Intel ® Pentium ® E5000/E2000series
- Supports Intel ® Celeron ® E1000 and 400series
- NOTE: Intel Xeon processor L3014 requires an LGA771
socket and is not supported.
- Chipset:
- Intel ® 3210 chipset
- ICH9R + PXH/Vchipset
- FSB:
- 1333 / 1066 / 800 MHz system bus
- Memory:
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered ECC / non-ECC DDR2
667/800MHz memory (Dual Channel)
- DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin
gold-plated DIMMs
- 256 MB, 512 MB, 1 GB, 2GB
- 1.8V only
- Expansion Slots:
- 1 (x8) PCI-E (using x16) slot
- 2x 64-bit 133 / 100MHz PCI-X (3.3V) slot
- 4x 32-bit 33MHz PCI (5V) slot
- On-Board Video:
- On-board XGI Z9S 32MB Graphics
- On-Board LAN:
- 1x Intel ® 82573V Gigabit PCI-Express Ethernet
- 1x Intel ® 82573L Gigabit PCI-Express Ethernet
- Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
- Form
Factor/Dimensions:
- ATX
- 12" x 9.6 " (30.5cm x 24.4cm), 6 layers
- Manageability:
- IPMI (Intelligent Platform Management Interface) 1.5 /
2.0
- W83793 H/W Monitor
- Power Configurations: ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal / External Modem Rign-on
- BIOS:
- 16Mb Flash EEPROM with Phoenix BIOS ®
- Features: Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- SMBIOS 2.3
|
