(1) 8-port SAS backplane, supporting up to
8 SAS HDDs or SATA HDDs
Default supports 4 SATA HDDs with onboard SATA controller only. It is required to install 3rd party add-on card or TYAN's TARO card M9000 and SAS cable CCBL-0641 to support 8 SAS or SATA HDDs. Add-on card is not shipped with the B3992T26V8H/R barebone.
Rear Panel I/O Ports:
(1) PS/2 Mouse & (1) keyboard ports
(2) USB 2.0 ports
(1) 9-pin COM port
(1) 15-pin VGA port
(2) GbE and (1) FE RJ-45 LAN ports
Internal I/O Interface:
One floppy connector
Four USB v2.0 ports (via cable)
One COM port (via cable)
Tyan 2 x 9 front-panel pin header
2 x 25 pin SMDC pin header (supports M3290)
One Parallel pin header
Front Panel Features:
I/O: (2) USB 2.0 ports
LED indicators:
HDD Active LED, power LED, (2) LAN LEDs
Total of (16) 240-pin 1.8V DDR-II DIMM sockets (8 on CPU1 and 8 on CPU2)
Up to 32GB reg. DDR-II 400/533/667MHz mem.
Supports ECC type memory modules
Expansion Slots:
(2) PCI-E x16 slots (each with x8 signal)
(2) PCI-X 133/100 MHz slots
(1) PCI-X 100 MHz slot
(1) PCI 32-bit 33MHz, v2.3 compliant slot
(6) total low profile cards supported
(1) Tyan TARO SO-DIMM socket
>> M9000 SAS/SATA II TARO card
- Adaptec AIC-9405/9410 SAS controller
- Supports up to 4-port (M9000-5) and 8-port
(M9000-10) SAS & SATA running at 3.0 Gb/s
- Adaptec HostRAID 0, 1 & 10 supported
On-Board LAN:
Dual GbE LAN (from BCM5780)
- Embedded in BCM5780
- Two 10/100/1000 RJ-45 LAN ports with LED
One Intel ® i82551QM fast Ethernet controller
- One 10/100 RJ-45 LAN port with LED
- Operating on 32bit/33MHz PCI bus
Interloper Inc., incorporated in 2004. Initially our focus was on custom industrial computers and I.T. parts. Over the years, we have evolved and now we sell Apparel, Home Goods, Luggage and a whole lot of consumer goods.
