Home     My Cart     login  
  My Account     Support     Contact Us  

 


Motherboard Search
Accessories, Batteries, Cables
Cases and Enclosures
CPU / Processors
Memory
Motherboards
MultiMedia
Networks & Communications
Peripherals
Security & Surveillance
Services
Storage & I/O Cards
Systems & Upgrades
Specialty ISA Computers
Specialty Upgrade Kits
Video Cards
Let's Play Golf

Home > Accessories, Batteries, Cables, Etc. > Riser Cards > 2U PCI Ribbon Riser Card

Click here to go back

103465 - 2U PCI Ribbon Riser Card
Condition: New . Warranty:90 days . $22.00



2U 32bit pci riser card

2U Triple 32bit PCI Riser Card

2u, 32bit pci, riser card,

2U 32bit PCI Riser Card (3 32-bit PCI slots)

PCITX3N1 is a PCI 3 in 1 right angle riser. The overall dimension of the main board assembly is 2.75"H x 7.10"W. The middle slot is connected directly to the gold fingers. Majority of the bus signals of the top slot is connected to the middle slot. However, there are some dedicated signals that are needed for the top slot, and they are borrowed from a narrow cable that is plugged into a nearby motherboard slot. The bottom slot is a completely independent connection, coming from a wide cable that connects to yet another PCI slot on the motherboard. This arrangement allows the bottom slot to work off a PCI slot on the Motherboard that is not common to the PCI slot where the riser is plugged in. The user can order the riser with a three PCI-32 bit slots or up to a three 64 bit slots configuration. The VIO voltage of each slot on the riser are selectable. All connectors are mounted on the B side of the riser card. The top PCI slot is located at 2.515", the center PCI slot is located at 1.715", and the bottom PCI slot is located at 0.915" from the bottom of the board. The wide cable and the narrow cable can be ordered in various lengths. A power option (-W) is available to provide more 12V, 5V and 3.3V to the connectors on the riser. It accepts the power from a 4 pin PC power connector for the floppy drive.



MB PCI/AGP Slot positions:

Position A: normally it's AGP, 6.4" away from the Keyboard connector edge.

Position B: normally it's 1st PCI, 7.2" away from the Keyboard connector edge.

Position C: normally it's 2nd PCI slot.

Position D: normally it's 3rd PCI slot.

Motherboard diagram for Riser Cards. PCI / agp Ribbon Riser Cards. 1u riser card, 2u riser card, 4u riser card, 1u agp riser card








  Home     My Cart    Login     My Account     Support     Contact Us     About Us     Press  

Copyright © 2019 INTERLOPER.COM. All rights reserved.