Home > Accessories, Batteries, Cables, Etc. > 2U PCI/AGP Riser Card
2U riser 3 in 1 right angle extender
Click here to go back
103467 - 2U PCI/AGP Riser Card
Condition: New . Warranty:90 days . $49.00
2U AGP 8x
(32bit) Right Angle Riser
This is a 32bit
PCI/8X AGP/32bit PCI, 3 in 1 right angle riser. It plugs in an AGP slot. This
riser is designed for chassis with horizontal cutouts that line up with the AGP
slot on the motherboard when it is located B position (see diagram below).
The overall dimension of the main board assembly is 2.95"H x 7.00"W.
The middle AGP connector connects directly to the AGP gold fingers. The top slot
is connected to the bottom slot. Some dedicated signals that are needed for the
top slot, are borrowed from a small paddle board that is plugged into a nearby
motherboard PCI slot. The bottom connector is a completely independent
connection, coming from a separate paddle board of yet another PCI slot on the
All connectors are mounted on the B side of the riser card. It is
populated with 2 PCI-32 bit connectors, and a 1.5V AGP connector. The gold
finger is cut for 1.5V (4x) AGP slot. The top PCI connector is located at
2.571", the center AGP connector is located at 1.771", and the bottom
PCI connector is located at 0.971" from the bottom of the board.
MB PCI/AGP Slot positions:
Position A: normally it's AGP,
6.4" away from the Keyboard connector edge.
Position B: normally it's 1st PCI,
7.2" away from the Keyboard connector edge.
Position C: normally it's 2nd PCI
Position D: normally it's 3rd PCI