LG Goldstar DRD-8120B

Part # 105630

Condition : Refurbished | Warranty : 90 days

Brand : LG
0 review | Add Your Review

$77.00

Goldstar DRD-8120B 12x40x DVD-ROM Drive

Goldstar DRD-8120B 12x40x DVD-ROM Drive

 

 

Goldstar DRD-8120B 12x40x DVD-ROM Drives, 12x DVD Drives,

 

Goldstar DRD-8120B 12x40x DVD-ROM Drive
Features:
  • Data transfer rate
    DVD-ROM 10.8 MB/sec(12x MAX) CD-ROM 6.0 MB/sec (40x MAX)
  • Average access time
    DVD-ROM 120 ms
    CD-ROM 90 ms
  • 512 KB buffer
  • Convenient E-IDE/ATAPI interface
  • MPC-III compliant
  • Plug & Play ready
  • DVD-R, CD-RW, CD-R compatible
Specifications
Maximum Data Transfer Rate DVD-ROM: 16.2 MB/sec (12X MAX)
CD-ROM: 6.0 MB/sec (40x MAX)
Burst Data Transfer Rate 16.67 MB/sec (PIO mode 4)
16.67 MB/sec (Multiword DMA mode 2)
Average Access Time DVD-ROM: 120 ms (typical)
CD-ROM: 100 ms (typical)
Rotation Method CAV (constant angular velocity)
Buffer Memory 512 KB
Interface E-IDE/ATAPI 2.8
OS Compatibility MS-DOS 3.1 or higher, Windows 3,1x/95/98/2000, Windows NT4.0/5.0, Solaris 2.4+, Linux'96 3.1.0
Supported Formats DVD-5,DVD-9,DVD-10,DVD-18, CD-ROM mode 1 & 2, CD-DA, CD-XA(mode 2, form 1 & 2), CD-R,CD-RW,DVD-ROM, DVD-R, CD-Plus, CD Enhanced, CD-Bridge, CD-i*, FMV, Photo CD multisession
Disc Loading Method Motorized tray
Front Panel Controls Load/Eject Button, Volume Control for Headphone Jack
Rear Panel Controls E-IDE interface, 4 pin power input, analog and digital audio outputs, mode selector jumper
Reliability MTBF 125,000 POH, 10% duty
Mounting Type Internal, horizontal or vertical
Roading Type Motorized tray
Size (WxDxH Without Bezel) Standard half height drive size
5.75"x 7.91"x 1.63"(149 mm x 208 mm x 42 mm)
Weight 2.35 lbs(1.07 kg)
Warranty Varies
Additional Features MPC Level 3 compliant
Plug and Play with Windows 95/98
Advanced dustproof design
Spin-down mode for energy saving
Digital audio output connector
To play a CD-I disc requires a separate interface card.
Note 1: Using the Mpeg-2 software supplied lets you watch DVD movies on your PC, without the need for an additional decoder interface card. The MPEG-2 software supplied will only work in Windows 95/98, and your PC should have the following minimum configuration(more is always better):
Processor: Intel Pentium II 266MHz or higher, or
Intel Celeron 300A or higher, or
AMD K6-II 300 MHz or higher
Memory More than 16MB RAM
Audio Card: ISA/PCI Audio card supporting 44.1kHz and 48kHz sampling rate
Video Card: PCI/AGP display card supporting DirectDraw 2.0 or above
No details available
No reviews available

Copyright © 2024 All Rights Reserved. Interloper