Supermicro X7SBU Motherboard
- Storage:
- Intel ® ICH9R SB SATA controller built-in (3 Gbps)
- RAID 0, 1, 5, 10 (Windows Only)
- RAID 0, 1, 10 support(Linux)
- Support for Intelligent Platform Management Interface
v.2.0
- IPMI 2.0 with virtual media over LAN & optional
KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for
KVM-over-LAN function
- Rear Panel I/O Ports:
- Super I/O: Winbond 83627HG chip
- IDTCV183-1
- Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
- External SATA supported
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- 1 Floppy controller; 1.44 MB
- 2x RJ45 LAN ports
- Up to 8x USB 2.0 / 1.1 compliant ports
- 2 rear ports + 2 Type A connectors + 2 internal headers
(4 ports)
- 1x VGA port
- PS/2 keyboard and mouse ports
- 1x Fast UART 16550 serial port
- 1x internal header
- Hardware Monitoring:
- Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V
Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU Core 4-Phase-switching voltage regulator with
auto-sense from 0.3750V-1.6000V
- FAN: Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
- Temperature: Monitoring for CPU and chassis
environment
- CPU Thermal Trip support
- PSU I2C temperature sensing logic
- Thermal Monitor (TM2) Support
- PECI
- CPU / System Overheat LED
- Suspend-state indicator LED
- +5 Standby power alert LED
- UID / Remote UID
- Chassis intrusion detection
- Chassis intrusion header
|
Motherboard Specifications
- Model:
- Supermicro X7SBU Motherboard
- Processor Support:
- Single LGA775 ZIF Socket
- Supports Quad-Core Intel ® Xeon ®
X3300/X3200 series
- Supports Dual-Core Intel ® Xeon ®
E3100/3000 series
- Supports Intel ® Xeon ® processor L3360 and
L3110 series
- Supports Intel ® Core2 Quad
Q9000/Q8000/Q6000 series
- Supports Intel ® Core2 Duo
E8000/E7000/E6000/E4000 series
- Supports Intel ® Pentium ® E5000/E2000series
- Supports Intel ® Celeron ® E1000 and 400series
- NOTE: 1600MHz CPU has to use 1600 MHz XMP Memory
- Chipset:
- Intel X48 chipset
- ICH9R + Intel ® 82573V + Intel ® 82573L
- FSB:
- 1600 / 1333 / 1066 / 800 MHz system bus
- Memory:
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR3
1333/1066/800MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600MHz
XMP DDR3 memory
- DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM,
240-pin gold-plated DIMMs or Non-ECC 1600MHz XMP DDR3 memory
- 256 MB, 512 MB, 1 GB, 2 GB
- Dynamic (1.5V to 1.9V)
- Expansion Slots:
- 2 (x8) PCI-e slot (using x16 slot)
- 1 (x4) PCI-e slot (using x8 slot)
- 1 UIO riser slot
- On-Board Video:
- On-board ATI ES1000 (32MB) graphics
- On-Board LAN:
- 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel ® 82573V + Intel ® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
- Manageability:
- Optional IPMI (Intelligent Platform Management
Interface) v1.5 / 2.0
- Power Configurations: ACPI / ACPM Power Management
- Wake-On-Ring (WOR) header
- Power-on mode control for AC power loss recovery
- Internal / External modem ring-on
- Form
Factor/Dimensions:
- Proprietary
- 8" x 13" (20.32cm x 33.02cm)
- BIOS:
- 16Mb Flash EEPROM with Phoenix BIOS
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0 / 2.0 (S3 Optional)
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
- Special Features:
- Important Note: For a general system, a 420W (minimum)
ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure
system stability].
|