2U PCI Ribbon Riser Card

Part # 103466

Condition : New | Warranty : 90 days

Brand : Interloper
0 review | Add Your Review

$0.00

2U 64bit pci riser card - convert 1 PCI slot to 3 PCI slots 2U 64bit PCI Ribbon Riser Card 2U 64bit PCI Ribbon Riser Card 1 x 3 This is a PCI 3 in 1 right angle riser card. The overall dimension of the main board assembly is 2.75"H x 7.10"W. The top slot is connected directly to the gold fingers. The middle and bottom slots are tied together, and their PCI bus signals come from a wide cable that connects to another PCI slot on the motherboard. However, there are some dedicated signals that are needed for the middle slot, and they are borrowed from a narrow cable that connects to yet another nearby motherboard PCI slot. This arrangement allows the top slot to work with an independent PCI slot on the motherboard than the other two slots. The wide cable and the narrow cables should connect to PCI slots on the Motherboard that are controlled by a common PCI bridge chip. All connectors are mounted on the B side of the riser card. The top PCI slot is located at 2.515", the center PCI slot is located at 1.715", and the bottom PCI slot is located at 0.915" from the bottom of the board. MB PCI/AGP Slot positions: Position A: normally it's AGP, 6.4" away from the Keyboard connector edge. Position B: normally it's 1st PCI, 7.2" away from the Keyboard connector edge. Position C: normally it's 2nd PCI slot. Position D: normally it's 3rd PCI slot.
No details available
No reviews available

Copyright © 2024 All Rights Reserved. Interloper