• BIOS:
  • 8Mb Flash EEPROM with Phoenix BIOS ®
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3 support
  • PCI 2.2
  • ACPI 1.0
  • Hardware BIOS Virus protection
  • SMBIOS 2.3
  • USB Keyboard support
  • PCI-X - 1.0
     
• On-Board Video:
  • On-board ATI Rage XL (8MB) graphics

• Rear Panel I/O Ports:
  • 2x RJ45 LAN ports
  • 6x USB 2.0 compliant / 1.1 compatible
  • 2 rear ports, 4 internal headers
  • 2 in front (FUCI), 2 in rear
  • 1x VGA port ( only)
  •  PS/2 keyboard and mouse ports
  • 1x Fast UART 16550 serial port
  • 1x Fast UART 16550 serial header
  • 1x ECP / EEP Parallel Header

• Form Factor:
  • ATX
  • Dimensions 12" x 9.6", (30.5cm x 24.4 cm)

PDSME Specifications

• Model:
  • Supermicro PDSME

• Processor Support:
  • Single LGA775 ZIF Socket
  • Supports an Intel ® Pentium ® D (Smithfield Dual Core) processor
  • Supports an Intel ® Pentium ® Extreme Edition processor
  • Supports an Intel ® Pentium ® 4 (Prescott) processor
  • Supports an Intel ® Pentium ® 4 Extreme Edition processor
  • Supports an Intel ® Celeron ® D processor with 256KB L2 Cache
  • Hyper-Threading (HT) capable
  • 1MB L2 Cache
  • 1066 / 800 / 533 MHz system bus

• Chipset:
  • Intel E7230
     
• FSB:
  • 1066 / 800 / 533 MHz system bus
     
• Memory:
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB of unbuffered, ECC / non-ECC DDRII 667/533/400MHz memory (Single / Dual Channel)
  • DDRII 667/533/400MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
     
• Expansion Slots:
  • 1 (x4) PCI-e slot
  • 2x 64-bit 133MHz PCI-X (3.3V) slots
  • 2x 64-bit 100MHz PCI-X (3.3V) slots

• On-Board LAN:
  • Dual-port Intel ® 82573V Gigabit PCI-Express Ethernet (Tekoa)
  • Supports 1000BASE-T, RJ45 output
     

• Manageability:
  • Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +5V Standby)
  • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
  • Adjustable CPU clock frequency ratio settings (via BIOS)
  • Total of five 4-pin fan headers
  • 5x fans with tachometer monitoring
  • Status monitor with firmware / software speed control
  • Status monitor for on/off control
  • Support 3-pin fans (with speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connector
  • Temperature Monitoring for CPU and chassis environment
  • CPU Thermal Trip support
  • Thermal Monitor (TM2) Support
  • CPU / System Overheat LED
  • +5V standby alert LED
  • Suspend-state indicator LED
  • Chassis intrusion detection
  • Chassis intrusion header