• Special Features:
  • Integrated SATA Controller
    Silicon Image Sil3114 SATA RAID Accelerator
    Supports S-ATA 1.0 specification
    Supports 4 channel SATA port for up to four SATA devices
    Supports RAID 0, 1, 10
    Connected to legacy 32-bit 33MHz PCI bus
  
  
• On-Board Video:
  • ATI® RAGE XL PCI graphics controller
  • 8MB Frame Buffer of video memory

• Rear Panel I/O Ports:
  • Stacked PS/2 mouse and keyboard ports
    Stacked two USB v1.1 ports + 1 RJ45 10/100 Base-T port w/ activity LED
    Two 9-pin UART serial ports
    One 15-pin VGA port
    Two RJ45 10/100/1000 Base-T ports with activity LED

• Internal I/O Interface:
  • One floppy connector supports up to two drives
    One 9-pin serial ports connector
    One 25-pin parallel port connector
    Four USB v1.1 ports
    Three front panel LAN activity LED connectors

Motherboard Specifications

• Model:
  • Tyan Thunder K8S Pro S2882G3NR

• Processor Support:
  • Dual µPGA 940-pin ZIF sockets
    Supports up to two AMD Opteron processors
  • Two onboard 3-phase VRMs
    128-bit DDR dual-channel memory controller (integrated in CPU)

• Chipset:
  • AMD-8131 HyperTransport PCI-X Tunnel
    AMD-8111 HyperTransport I/O Hub
    Winbond W83627HF Super I/O ASIC
    Analog Devices ADM1027 Hardware Monitoring IC

• Memory:
  • 128-bit DDR memory bus
    Eight 184-pin 2.5-Volt DDR DIMM sockets - each CPU controls four
  • Supports up to 16GB of Registered DDR
    Supports ECC type memory modules
  • Supports PC3200 / 2700 / 2100 / 1600 DDR

• Expansion Slots:
  • Two independent PCI-X buses
    PCI-X bridge A supports 64-bit 133/100/66/33 MHz with two 3.3V PCI-X slots
    (one with ZCR support - option)
  • PCI-X bridge B supports 64-bit 133/100/66/33 MHz with two 3.3V PCI-X slots
  • One legacy 32-bit 33 MHz (5V) PCI slot
    

• On-Board LAN:
  • Broadcom BCM5704C dual-channel GbE
    - Two RJ-45 LAN connectors with LEDs
    - Connected to PCI-X Bridge A
    Intel 82551QM 10/100 LOM - Operating at 32-bit/33MHz PCI bus

• BIOS:
  • AMI ® BIOS 8.0 on 4Mbit LPC Flash ROM
    Supports APM 1.2 & ACPI 1.0
    Power Management S1, S4, and S5 support

• Form Factor:
  • Extended ATX footprint (13" x 12", 304.8x330.2mm)
    EPS12V (24pin + 8pin) power connectors