• Manageability:
  • Total of nine 3-pin fan headers
  • Six fan headers with monitoring
  • One 2-pin Chassis Intrusion header
  • Temperature, voltage and fan monitoring
  • TYAN Server Management Daughter card
    (optional) supports features listed below via
    IPMI header
  • QLogic Zircon Baseboard Management Controller
    (BMC) based on powerful ARM7 technology
  • Tailored for IPMI highest 2.0 spec.
  • Supports KCS and BT styles
  • Flexible Windows or Linux Management Solution
  • Supports RMCP and SNMP protocols
  • Supports ASF standard and EMP
  • I2C serial multi-master controllers and UARTs
  • Build-in IPMB connector
  • Remote power on/off and reset support
    (IPMI-over-LAN)
  
  
• Form Factor:
  • SSI EEB v3.0 Footprint, fits most Rackmount E-ATX chassis (12"x13"; 304.8x330.2mm)

Thunder K8SE Specifications

• Model:
  • Tyan Thunder K8SE (S2892)

• Processor Support:
  • Dual µPGA 940-pin ZIF sockets
  • Up to two AMD Opteron 200 series processors
  • Integrated 128-bit Dual-Ch DDR memory controller
  • Supports Single and Dual Core processors

• Chipset:
  • AMD-8131 PCI-X Tunnel
  • NVIDIA nForce Prof. 2200 (CrushK8-04 Pro)
  • Winbond W83627HF Super I/O ASIC
  • Analog Devices ADT7463 Hardware Monitoring IC
    
    
• Memory:
  • 128-bit dual channel memory bus
  • Total eight 184-pin 2.5-Volt DDR DIMM sockets (four per CPU)
  • Supports up to 16GB of Registered DDR
  • Supports ECC type memory modules
  • Supports DDR 400 / 333 / 266 memory
    
    
• Expansion Slots:
  • One x16 PCI Express slot with x16 signal
  • One x16 PCI Express slot with x4 signal
  • One PCI 2.3 compliant 5V tolerant 32bit/33MHz
  • Two independent 64-bit PCI-X buses
    - Two 133/100 MHz PCI-X slots from Bridge A
    - One 100/66 MHz PCI-X slot from Bridge B
    - One 100/66 MHz max Tyan TARO SODIMM
    from Bridge B

• On-Board LAN:
  • One Broadcom BCM5704C dual-ch GbE
    - Two RJ-45 LAN connectors with LEDs
    - Connected to PCI-X Bridge B
    - Two Front Panel LED headers
  • One Intel ® 82551QM 10/100 Mbps Ethernet
    controller
    - One RJ-45 LAN connectors with LEDs, stacked
    on rear two USB 2.0 ports
    - Connected to 32bit/33MHz PCI 2.3 bus
    - One Front Panel LED header
    

• BIOS:
  • SSI EEB v3.0 Footprint, fits most Rackmount E-ATX chassis (12"x13"; 304.8x330.2mm)
  • Supports ACPI 2.0 and SRAT
  • Supports PXE via Ethernet, USB device boot
  • SMBIOS 2.3.1, BBS 1.1 compliant
  • Headless Operation via serial console redirect
  • 48-bit LBA Support
  • Phoenix BIOS on 8Mbit LPC Flash ROM
  
  
• On-Board Video:
  • ATI® RAGE XL 8MB PCI graphics controller