Supermicro X6DVL-EG2 Dual 604 Socket for Intel 64bit Xeon Intel E7530 4 DIMM SATA IDE RAID VIDEO USB LAN 2 PCI Express 4x 4 PCI Support. ATX form factor.

Supermicro  X6DVL-EG2 Motherboard

Dual 604 Socket  for Intel 64bit Xeon, Intel E7530, 4 DIMM, SATA, IDE, RAID, VIDEO, USB, LAN, 2 PCI Express 4x, 4 PCI Support.

• Internal I/O Interface: 
  • 6300ESB (Hance Rapids) SATA Controller (2x Drive support)
  • 2x SATA Ports
  • RAID 0, 1 support
  • Support for Intelligent Platform Management Interface v.2.0 
    (Optional:AOC-IPMI20-E ) Card not included. 
     
• Storage/RAID: 
  • Two Serial ATA ports
  • Two SATA hard drives supported
  • Dual EIDE channels support up to four UDMA / IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
  • 1 Floppy controller; 1.44 MB support
• BIOS: 
  • 8Mb Flash EEPROM with AMI ® BIOS (SST)
  • Plug and Play (PnP)
  • ACPI 1.0
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • SMBIOS 2.3
  • Hardware BIOS Virus protection
  • USB Keyboard Support 
     
• On-Board Video: 
  • ATI Rage XL SVGA PCI video controller
  • 8 MB of video memory
• Rear Panel I/O Ports: 
  • 2x RJ45 LAN ports
  • 2x USB rear ports
  • 1x USB internal header for 2 ports
  • USB 2.0 Compliant / 1.1 Compliant
  • 1x VGA port
  •  PS/2 keyboard and mouse ports
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
• Form Factor: 
  • ATX
  • 12" length x 10" width
    (30.5cm x 25.4cm)
  • PCB height: 0.062"(62mil)
  • Board height: 0.041"(41mil)

X6DVL-EG2 Specifications 

• Model: 
  • Supermicro X6DVL-EG2
• Processor Support: 
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel ® 64-bit Xeon ® processor(s) of the same type
  • 800 MHz system bus
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
• Chipset: 
  • Intel E7530
     
• FSB: 
  • 800MHz
     
• Memory:
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB DDR-II 400MHz memory
  • Dual channel memory bus
  • Memory must be populated in pairs
  • DDRII 400MHz registered ECC buffered SDRAM 72-bit
  • 240-pin gold-plated DIMMs 
     
• Expansion Slots:
  • 2 (x4) PCI-e slots
  • 1x 64-bit 66MHz PCI (3.3V) slot 
    (PCI-X cards are not supported in this slot)
  • 3x 32-bit 33MHz PCI (5V) slots
• On-Board LAN: 
  • Dual Intel ® 82541GI
  • Single Port Gigabit Controller
  • Support for 10Base-T, 100Base-TX, 1000BASE-T, and 2x RJ45 
     
• Manageability:
  • Monitors for CPU Cores +3.3V, +5V, ±12V & +5V Standby
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.83V-1.61V
  • Adjustable CPU clock frequency ratio
  • Total of six 4-pin fan headers 
    6x fans with status tachometer monitoring
  • Status monitor for on/off control
  • Status monitor for speed control
  • Support for 3-pin fan and 4-pin fan speed control
  • Low noise fan speed control 
  • Pulse Width Modulated (PWM) fan connector
  • Temperature Monitoring for CPU, chassis environment
  • CPU thermal trip support 
  • Thermal Control for 6x Fan Connectors
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • CPU / System Overheat LED 
  • Suspend-state indicator LED 
  • +5V Standy Alert LED
  • Chassis intrusion detection 
  • Chassis intrusion header 
  • SDDC Support