Tyan S2380 Trinity K7 (VIA® Apollo KX-133 Chipset. Slot A 200 MHz FSB 768MB Memory (3 DIMMs) 6xPCI 1xISA 1xAGP 2x/4x slots ATX Form Factor. Motherboard only. No manual cables or drivers.

Tyan Trinity K7 S2380

• Hardware Monitoring:
  • hardware monitoring chip
    3-pin Fan monitoring headers
    Flexible Temperature Sensor Under CPU heatsink
    Hardware Detects +/- 5V, +/- 12V, CPU status
    System Health Status Detect
    3-pin Wake on LAN header 
    3-pin Wake on Ring header
• Internal I/O Interface:
  • Dual channel master mode
    Supports four Enhanced IDE devices
    Support for PIO Mode 3/4, Ultra DMA
    33 / 66 and ATAPI compliant devices
• Rear Panel I/O Ports:
  • One Floppy connector for up to two drives
    Two 9-pin 16550 UART Serial ports
    One 25-pin ECP / EPP Parallel port
    PS/2 Mouse & Keyboard ports
    Four USB ports (two headers via cable optional)

Motherboard Specifications

• Model:
  • Tyan Trinity K7 S2380
• Processor Support:
  • Single Slot A; 200MHz FSB AMD Classic Athlon 500MHz to 1 GHz Auto-detect Processor Voltage
• Chipset:
  • VIA Apollo KX-133; VT8371 and VT82C686A
• Memory:
  • Three 168-pin 3.3V DIMM Sockets
  • Supports up to 768 MB Supports PC100 / PC133 SDRAM and VCM SDRAM
  • ECC memory not supported
• Expansion Slots:
  • One 1x / 2x / 4x AGP v.2.0 slot
  • Six 32-bit PCI v.2.2 compliant slots
  • One 16-bit ISA slot (shared w/ a PCI slot)
• On-Board Audio:
  • VIA VT82C686A Southbridge Digital Link Audio
• BIOS:
  • Award BIOS 2Mbit Flash RAM
    Supports APM & ACPI
    Auto detection of memory size
    Auto configuration of IDE hard disk types
    User settings of hardware monitoring
    Multiple boot options 
    DMI 2.-0 / PC99 compliant
• Form Factor:
  • ATX 2.01 (12.0" x 8.2") 4-layer board