S2510 Thunder LE S2510 Dual socket 370 motherboard. ServerWorks ServerSet III LE chipset FSB 100/133 MHz 4 DIMM sockets 2 64bit PCI slots. On-Board video and Dual 10/100 LAN controllers ATX Form Factor. Motherboard only. No manuals cables or drivers.

Tyan Thunder LE S2510NG

Dual socket 370 motherboard

• Rear Panel I/O Ports:
  • One standard floppy connector supports up to two drives
  • Two USB ports
  • One slim floppy connector (optional)
  • One 9-pin 16550-based serial port
  • PS/2 keyboard and mouse ports
• Internal I/O Interface:
  • Dual-channel master mode
  • Up to four Enhanced IDE devices
  • Support for DMA IDE and ATAPI compliant devices
  • Due to limitations of the ServerWorks chipset, IDE transfer rates are limited to DMA at 16.6MB/sec
• Integrated SCSI (Optional):
  • LSI SYM53C1010 chipset
  • Dual-channel Ultra160 SCSI support
  • 160MBps throughput and up to 15 devices per channel
  • Ch A & B are both 68-pin connector

Motherboard Specifications 

• Model:
  • Tyan Thunder LE S2510NG
• Processor Support:
  • Dual PGA370 ZIF sockets supports up to two Intel PIII processors (FC-PGA)
  • Two on-board VRMs (VRM 8.4 spec).
• Chipset:
  • ServerWorks ServerSet III LE chipset
• FSB:
  • 100/133MHz 
     
• Memory:
  • Four 25 ° angled 3.3v 168-pin DIMM sockets
  • Supports up to 4GB of PC133 reg. SDRAM
  • Supports ECC (72-bit) memory modules
• Expansion Slots:
  • Two 64-bit 66MHz (3.3-volt) PCI slots (available in a 64-bit 33MHz configuration)
  • PCI riser card required when installed in 1U/2U chassis 
     
• On-Board Video:
  • ATI RAGE XL graphics accelerator 4MB frame buffer
  • Standard 15-pin analog VGA port
• On-Board LAN:
  • Two Intel 82559 LAN controllers
  • 10/100Mbps data transfer rate per controller
• BIOS:
  • AMI BIOS on 4Mb Flash ROM
    Auto-configuration of IDE hard drive types
• Form Factor:
  • ATX form factor (12" x 9.6")