|
- IPMI:
- 1U support Intelligent
Platform Management Interface v.2.0+ (Optional: 1UIPMI-B)
- RMM (Remote Management Module)
- (Card not included)
- BIOS:
- 4Mb Flash EEPROM with AMI ® BIOS
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0
- Fan Speed Control
- Hardware Monitoring:
- Monitors CPU Core Voltages, +3.3V,
+5V, ±12V & +3.3V Standby, +5V Standby, HyperTransport voltage 1.2V,
memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V
- Up to 5 fan status
- Supports System Management Utility
- Total up to 5-fan status
- 3-pin fan speed control
- Monitoring for CPU and chassis
environment
- Overheat LED
- Chassis Intrusion Header
- Management:
- Optional IPMI (Intelligent Platform
Management Interface) 2.0
- Super Doctor III
- Watch Dog
- ACPI/API Power Management
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power
loss recovery
- Internal/External modem remote ring-on
|
Motherboard
Specifications
- Model:
- Supermicro H8DAR-I Motherboard
- Processor Support:
- Dual 940-pin ZIF Sockets
-
Supports up to two Dual-Core AMD Opteron 200 Series processor(s)
- VRM x3
- Chipset:
- AMD 8131 HyperTransport PCI-X
Tunnel
- AMD 8111 HyperTransport I/O Hub
- FSB:
- 1000 MHz HyperTransport Link
- Memory:
- Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 400 MHz
memory or
- Supports up to 16 GB DDR 333 MHz
memory or
- Supports up to 32 GB DDR 266 MHz
memory
- Single or Dual (recommended) channel
memory support
- For Single CPU: Memory must be
populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory
be populated equally in adjacent memory banks
- DDR 400/333/266MHz buffered
(registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
- Dimm sizes: 256 MB, 512 MB, 1GB, 2GB,
4GB**
- 2.5 V only
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
- Expansion Slots:
- 1 64-bit 100MHz PCI-X (3.3V) slot
- IPMI 2.0 expansion slot
- On-Board Video:
- ATI Rage XL 8MB PCI
Graphics Controller
- On-Board LAN:
- 2 RJ45 LAN ports
- Broadcom ® 5704 Dual Port Gigabit
Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
- Storage:
- Dual ATA 133/100 EIDE channels
support up to four UDMA IDE devices
- 1 Floppy port; 1.44 MB, 2.88 MB,
3-mode support
- Rear Panel I/O Ports:
- 2 Fast UART 16550 serial ports
- PS/2 keyboard and mouse ports
- FUCI
- Up to 5 USB Ports 1.1 Compliant
- Form Factor:
- Extended ATX
- Dimensions: 12" x 13.05" (30.5cm x
33.2cm)
|
