 BUS ARCHITECTURE |
| 32-bit PCI Bus and 16-bit ISA Bus Compatible |
| EXPANSION SLOTS |
| 4 x 32-bit PCI slots |
| 2 x 16-bit ISA slots |
| 1 x 32-bit AGP slot |
| AGP CONNECTOR |
| Accelerated Graphics Port Connector Supports AGP 66MHz/133MHz (Sideband) 3.3V Device. |
| CACHE MEMORY |
| 512K or 256K Pipelined Burst Level 2 cache in Pentium II CPU cartridge. |
| SYSTEM MEMORY |
| Three 168-pin DIMM Sockets to Support (8, 16, 32, 64, or 128MB 3.3V DRAM or SDRAM) |
| Total Memory Capacity: 384MB Max. |
| ON BOARD SCSI |
| On Board Adaptec AHA7880 Ultra Wide SCSI Support: Fast 20 SCSI, SCSI 2 Standards |
| Synchronous Data Transfer Rate: 20/40 MB/s (Ultra Fast/Ultra Wide) |
| Asynchronous Data Transfer Rate: 6/12 MB/s (Ultra Fast/Ultra Wide) |
| SCSI CONNECTOR |
| 50 Pin SCSI Connector for Fast SCSI Cable |
| 68 Pin High Density SCSI Connector for Wide SCSI Cable |
| ON BOARD SUPER I/O |
| 1 Floppy Port (up to 2.88MB, Japan 3 Mode Floppy Supported) |
| 2 Serial Ports (16550 Fast UART Compatible) |
| 1 Parallel Port (ECP, EPP Port) |
| IrDA TX/RX Header (Optional) |
| ON BOARD PCI IDE |
| Dual Channel UltraDMA/33 Bus Master IDE Ports (Support up to 4 IDE devices and LS-120MB Floppy Drive) Support: |
| PIO Mode 3 & 4 |
| DMA Mode 2 |
| U-DMA/33 |
| Greater Than 8.4GB HD, ATAPI IDE CD-ROM Support |
| ATX POWER CONNECTOR |
| 3V, 5V and 12V 20-Pin ATX Power Connector. Soft Power Support |
| VOLTAGE REGULATOR |
| Built in Switching Voltage Regulator to Support 1.8V to 3.5V |
| BIOS |
| Award AGP BIOS with ACPI, DMI, Green, Plug and Play Features |
| Adaptec PCI SCSI BIOS |
| 2M-bit Flash EPROM |
| ATX DOUBLE DECKER |
| 2 x USB Ports, 1 x PS/2 Keyboard Port,1 x PS/2 Mouse Port,1 x Parallel Port,2 x COM Ports. |
| OPTIONS |
| H/W Monitor: Optional LM78 to support Fan Status Monitoring and Alarm, CPU Voltage, System Temperature Monitoring and Alert, |
| S/W LanDesk Client Manager to Provides Total S/W & H/W Server or Desktop Hardware Monitoring Solution. |
| Retention Mechanism & Heat Sink Support Brace. |
| BOARD SIZE |
| ATX Form Factor 19.1cm x 30.5cm (7.5" x 12") |
